1.The Fin Forming Machine must be safe grounding to ensure safety before connecting electricity.
2.Do not operate the fin-former without trained operators. The fin producing machine operator need master the use of procedures,working principle and performance before independent operating.
3. Be careful and meticulous operation to avoid risk.
4. Check the parts lubricated such as CAM device, slide block, upper and lower guide rail every day. Oiling one time every 30 minutes. Lubricating oil brand is 32 #.
5.Check whether the belt is excessively worn, parallel, too tight or too loose for the surface of the belt weekly. Please adjust or replace the belt in time if do not conform to standard.
6. Keep working table clean and good surrounding environment.
7. Check the quality of lubricating oil termly. Gear lubricating oil is replaced every three months, other lubricating oil every two months.
8. It is necessary to stop the fin molding machine immediately to check and maintenance if find abnormal or faults in the operation.
Copyright © 2018 Wuxi Better Technology Co., Ltd All rights reserved.